
Add to Cart
3G 1080P 720P High Definition Video Recorder dvr mobil wifi gprs gps mobile dvr Free CMS GPS System
Description:
4CH SD Card Vehicle Mobile DVR
* 1080P/720P
* with GPS /3G/WIFI (optional)
* 2 SD card (each128 GB MAX)
* 2CH alarm input, 2CH alarm output
* 1 RS485 interface, 1 RS232 interface
Function:
4 channel video/audio input, 1080P/720P adjustable
H.264 video compression, Linux operation system, dual streaming
One or two SD card slots(Max 128 GB for each)
Digital watermark
Internal GPS /3G/WIFI modules optional
Motion detection
8 seconds power-off delay for data protection, in order to prevent data lost and file destroyed by instant power-off
Other interfaces such as RS485, RS232 etc
Peripheral device extension supported, e.g. Control panel, bus stops announcement
Black box for vehicles, recording speed, position, acceleration, temperature, brakes, backing up, turns, alarms and other important information.
DC 8V to 36V wide range voltage power supply, embedded design in industrial
Standard, aluminum metal shell, low power consumption
Operating temperature -25℃~+85℃
Reversing switch function
Item | Parameter | Specification | |
System | Language | Chinese / English | |
OSD | Graphic User Interface(OSD menu) | ||
Password | User password/Administrator password | ||
Video | Input | 4CH video input, 1.0Vp-p, 75Ω | |
Output | 1CH video output, 1.0Vp-p, 75Ω | ||
Preview | 1CH/4CH preview | ||
Recording | PAL 25fps/NTSC 30fps | ||
Image Compression | H.264 Main profile, 100fps | ||
Audio | Input | 4CH | |
Output | 1CH | ||
Recording Mode | Audio/Video sync | ||
Image Processing & Storage | Video format | 720P/1080P | |
Video Stream | ISO14496-10 | ||
Video Bit Rate(kbps) | D1:2048 ~ 400kbps | ||
HD1: 2048 ~ 380kbps | |||
CIF: 1536 ~ 128kbps | |||
8 level settings, highest: level 1 | |||
Audio Bit Rate | 8KB/s | ||
Storage | 1 or 2 SD Cards; Max.64GB for each card | ||
Alarm | Input | 2CH input | |
Output | 2CH output, high level 12V output | ||
Communication Port | RS485 Interface | 1 RS485 interface | |
RS232 Interface | 1 RS232 interface | ||
Extended Interface | Control Panel | Connect to bus station reporter or control panel | |
Audio Power amplifier | Support 2CH audio power amplifier output | ||
GPS | Built-in GPS module, Geographical co-ordinates, driving speed can be read in coding flow, and uploaded via wireless(optional) | ||
G-Sensor | Build-in G-Sensor | ||
Software | L&V CMS L&V CS | Video preview, GPS uploading, alarm uploading, central command parameter configuration etc. via wireless,Play back video on computer and analyze vehicle information from recording file | |
Upgrade | Support SD Card upgrade | ||
Weight | N.W. | 0.9kg | |
G.W. | 1.45kg | ||
Dimension | 162mm*128mm*47mm |
Drawing:
Accessories:
1)The server software is free? What are the system requirements to use this software?
Yes, it is free of charge.
For server setup, you need to buy a static IP adress from your local network provider, and then the computer should be with good performance (HDD capacity should be above 500GB, Memory above 4G, CPU above 2G, with dual core, Network interface should be 100 Mega or 1000 mega.
2)What Operating system needs to be used,the serv? Windows or server? Can the WIFI auto download software be placed on the same system?
RE: yes, you could use windows system, 7 or 8 are both okay. Also the wifi auto download software are with the same system. In fact, our current software are all based on windows system.(only Clients is with android system)
3)When we start using your server and after some time we build our own, can the IP address in the units be changed remote or do we do this by wire?
If you build your own server, then you could change the DVR local settings by manual. After you used your own server, then you could run the server TOOl software, then you could remotely change the settings of your vehicles, this is no problem.